Selective sorption of Fe(III) using modified forms of chitosan beads

Modified chitosan beads (CB) were prepared and used for the removal of Fe(III) ions from aqueous solution. The advantages of modified CB than raw CB have been explored. The sorption capacity (SC) of the modified forms of CB namely, protonated CB, carboxylated CB, and grafted CB were found to be 3533, 3905, and 4203 mg kg^?1, respectively, while the raw CB showed the SC of 2913 mg kg^?1 only. Batch adsorption studies were conducted to optimize various equilibrating conditions like contact time, pH, and coions. The sorbents were characterized by FTIR, WDXRF, and SEM with EDAX analysis. The sorption process has been explained with Freundlich and Langmuir isotherms. Thermodynamic parameters such as ΔG°, ΔH°, and ΔS° were calculated to understand the nature of sorption. Modified CB are more selective for Fe(III) than Cu(II), which inturn higher than Cr(VI). A suitable mechanism for iron sorption onto modified CB was established. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Mechanical,morphological, and thermogravimetric analysis of alkali-treated Cordia-Dichotoma natural fiber composites

ABSTRACT

Usage of composites with natural fiber reinforcement is drastically increasing in recent times because of their low density, biodegradable nature, and low cost. However, natural fibers have certain core problems such as poor adhesion between the fiber and matrix and a relatively high degree of moisture absorption. Alkaline treatment of natural fibers is aimed at improving the adhesive strength so that effective stress transferability takes place in the composite. In the present work, Cordia-Dichotoma fibers were treated with sodium hydroxide (NaOH) and composites were prepared with different weight ratios of these fibers reinforced with epoxy. The prepared composites were tested for their tensile and flexural strengths (mechanical properties). Besides, for a comprehensive material characterization, IR spectroscopy (FT-IR), scanning electron microscope, and thermogravimetric analysis were carried out. This work investigates the influence of aforementioned NaOH treatment on thermal, mechanical, and morphological properties of the composite material.     

Efficacy of continuous wear PureVision contact lenses for therapeutic use.

PURPOSE: To evaluate the Bausch and Lomb PureVision contact lens as continuous wear contact lens for therapeutic and medical indications in a prospective open-ended non-randomized trial. METHODS: Patients who required therapeutic contact lens wear for various indications such as pain relief, corneal protection, persistent epithelial defects, corneal perforation and chemical burns were fitted with PureVision continuous wear contact lenses (balafilcon A, 36% water content). Success or failure of specific treatment indication was assessed in each case with evaluation of ocular and lens related complications. RESULTS: 30 eyes of 28 patients were fitted with PureVision continuous wear contact lenses. A successful fit was seen in 27 of 30 eyes with therapeutic success in 26 of 30 eyes. However, all patients reported symptomatic relief. Duration of lens use ranged from 3 days to 3 months. Dry eye was the most frequent cause of contact lens associated therapeutic failure. Complications included lens loss (two eyes), tight lens (one eye) and infective keratitis (two eyes). CONCLUSIONS: PureVision contact lenses were found to be safe and efficacious for continuous wear therapeutic use to a maximum of 90 days. The contact lens was also easier to handle by virtue of its resilient nature. There were no significant corneal complications of hypoxia, i.e. corneal oedema. Lens losses and deposits were minimal. The lens performance and fitting characteristics compares favorably with previous therapeutic lenses used by the investigators. This new lens may be considered as a safe and effective alternative for use as bandage contact lens.     

Cuphea a rich source of medium chain triglycerides: Fatty acid composition and oil diversity in Cuphea procumbens

The phenological characteristics, oil content, and fatty acid composition of 34 selections of Cuphea procumbens have been studied. The mean seed yield per plant was 9.7 ± 0.43 g. Maximum seed yield (16.7 g) was noticed in NBC‐27, while the average number of fruits per plant was 124.9 ± 10.7. The oil content in the seeds ranged from 16.7—28.7%, maximum being in NBC‐34. The fatty acid composition revealed the presence of capric acid (C10:0) in all the selections of C. procumbens as the major constituent of the oil ranging from 87.7—94.6%. C. procumbens showed its novelty as an alternative source of capric acid and may be utilized as a renewable resource in the production of plasticizers and lubricants which wholly depend on petrochemical import. Researches are in progress in order to obtain tolerant cultivars against wild plant characteristics and some delayed seed shattering plants have been identified.     

Microstructure of vinylidene chloride-ethyl acrylate copolymers by one- and two-dimensional NMR spectroscopy

Vinylidene chloride/ethyl acrylate (V/E) copolymers were prepared by photopolymerization using uranyl ion as a photosensitizer at room temperature. Copolymers were characterized by chlorine estimation, gel permeation chromatography, ¹H- and ¹³C-NMR, 2D heteronuclear single quantum correlation (HSQC), and homonuclear 1H–2D double quantum filter correlation spectroscopy (DQF-COSY). Reactivity ratios for the copolymerization of V with E were calculated using the Kelen-Tudos (KT) and the nonlinear error in variables (EVM) methods. The reactivity ratios obtained from the EVM methods are r_V = 0.80 ± 0.15 and r_E = 0.87 ± 0.04. The microstructure was calculated in terms of the distribution of V- and E-centered triad sequences from ¹³C{¹H}-NMR spectra of the copolymers. 2D HSQC was used to analyze the complex ¹H-NMR spectrum and 2D COSY shows the various bond interactions, thus inferring the possible structure of the copolymers. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 417–426, 1998     

Comparison of Alkali Metal Promoted MgO Catalysts for Their Surface Acidity/Basicity and Catalytic Activity/Selectivity in the Oxidative Coupling of Methane

Alkali metal (viz. Li, Na, K, Rb and Cs) promoted MgO catalysts (with an alkali metal/Mg ratio of 0·1) calcined at 750°C have been compared for their surface properties (viz. surface area, morphology, acidity and acid strength distribution, basicity and base strength distribution, etc.) and catalytic activity/selectivity in the oxidative coupling of methane (OCM) to C₂-hydrocarbons at different temperatures (700–750°C), CH₄/O₂ ratios (4·0 and 8·0) in feed, and space velocities (10320 cm³ g⁻¹ h⁻¹). The surface and catalytic properties of alkali metal promoted MgO catalysts are found to be strongly influenced by the alkali metal promoter and the calcination temperature of the catalysts. A close relationship between the surface density of strong basic sites and the rate of C₂-hydrocarbons formation per unit surface area of the catalysts has been observed. Among the catalysts calcined at 750°C, the best performance in the OCM is shown by Li–MgO (at 750°C). © 1997 SCI.     

Group mobility by cooperative communication for high speed railway

Wireless Networks - The high speed railway (HSR) provides more convenience to people, so the main attention is given to provide the reliable communication inside the train. It is the challenging...     

Effective removal of Cr(VI) and methyl orange from the aqueous environment using two-dimensional (2D) Ti3C2Tx MXene nanosheets

Industrial use of heavy metals and dyes critically depends on the effective handling of industrial effluents. Effective remediation of industrial effluents using various adsorbent materials has thus become critical. In this paper, we study two-dimensional MXenes as an adsorbent for removing Cr(VI) and methyl orange (MO) in waters. The physico-chemical performance of MXenes was studied using X-ray diffraction, Fourier transform infrared spectroscopy, Brunauer?Emmett?Teller, scanning electron microscopy, high resolution-transmission electron microscopy, thermogravimetric analysis, and X-ray photoelectron spectroscopy techniques. The adsorption system, including influence of contact time, pH of solutions, co-ions, and desorption experiments were performed for effective Cr(VI) and MO removal. The Cr(VI) and MO removal rate of the MXenes was very fast, and the kinetic system was driven by pseudo-second-order kinetics. The sorption isotherm closely well-tailored with the Langmuir isotherm, and the maximum removal efficiencies were 104 and 94.8 mg/g for Cr(VI) and MO, respectively. The MXenes was successfully regenerated by 0.1 M NaOH aqueous solution and can be repeatedly recycled. The uptake of Cr(VI) and MO by the MXenes was mainly due to chemical adsorption, namely electrostatic adsorption, complexation, surface interactions, and ion exchange mechanisms. This investigation demonstrates the selectivity and feasibility of the MXenes as a real adsorbent for eliminating Cr(VI) and MO from the aqueous environment.     

Optimal Sensing and Transmission of Energy Efficient Cognitive Radio Networks

Wireless Personal Communications - The issue of spectrum scarcity can be alleviated by the cognitive radio technology with efficient spectrum sensing and allocation of free spectrum bands....     

Analysis of a novel (LCR)trap-LC-RC filter with improved performance for standalone inverters

ABSTRACT

This work introduces a new passive filter structure for a pulse width modulated inverter used in standalone applications. The proposed structure consists of an additional capacitor connected across the resistance-capacitance branch of the traditional LCR filter and an additional resistor connected across the trap filter capacitor in the traditional (LC)_trap-LCR filter configuration which helps to reduce damping power loss and increase harmonic attenuation while maintaining the same overall filter size of conventional filters. A comprehensive parameter design procedure of the proposed filter is introduced which considers inverter switching frequency and choice of damping components. Further, particle swarm optimisation algorithm is newly employed in this work to minimise resonant peaking on the premise of allowable values of overall filter inductance, capacitance and resistance. Simulation and experimental results are presented to analyse the performance of the proposed filter and a comparison is established with other passive filter topologies. A five-level inverter with the proposed filter is implemented using a SPARTAN- 6 XC6SLX25 processor on an experimental set-up. The experimental results show an attractive performance of the proposed filter in providing improved inverter output waveforms, significant harmonic reduction in the high-frequency band, reduced resonant peaking, lesser harmonic distortion and lower damping power loss.